This is an attachment for a rotary tool - Dremel / Ozito that once fixed to a table either with clamps or screws, allows the tool to be positioned at multiple angles.
Features a Ball & Socket joint that can be tightened down to the position needed.
Also features a channel from the bottom thru to the front of the tool for threading wires to provide power for LED's. These can be strips that are stuck on to provide light to the front.
Geeetech Full Metal Aluminum
20% infill is ok but better if the Rod is printed with a denser infill for strength. After all this is plastic.
Added a new STL file - bbBracketNew - with the fat trimmed off. Use instead of bbBracket.stl to lessen print mass & time. Also a new build plate with the new part,
Main Bracket updated
The mod for the main bracket left a gap of 0.05mm between the top & bottom that could cause weakness although this should not affect the printing, given that the difference is so small. I moved them closer together and they are now correctly aligned into one solid model.
bbBracketNew.stl and bbDremelStandBuildPlateNew.stl have been updated and also the Sketchup .skp file.