1/4"(6.35mm) Hex compatible
Make your own precision hand tools
now using both sides of the handle
This handle is compatible with any Hex 1/4" (6.35mm) tool bits.
This is just a handle. If you need some tool bits or different handles,
visit : http://www.thingiverse.com/thing:1381028
Like the Original, this Double Sided Bodies
come in 5 different sizes :
20mm (very short)
100mm (very long)
Tips and tricks :
It's easier to fix a bit too loose than too tight. For that, just put a tiny bit of Blu-Tack down the socket (the female part) and you should be good for hundreds of uses before having to change it.
The stl files are setup to ensure the best print as possible regarding precision and "durability". This tool handles should be printed sideways without support (support can be used if you want to ensure the squareness of the plugs, some extra cleaning work will then be needed).
Don't print too fast and wait for the it to cool down before handling.