The progress of this case is unfortunately discontinuted. I have built an enclosure for my printer and have no longer the Pi mounted onto the frame. There are some remixes available that addresses the compatibility issues with the newer electronics case on the MK2S.
The old design files are re-uploaded per request.
This is my custom made case for the Raspberry Pi computers for those that want to run a 3D print server like OctoPrint.
The case is mounted on the back side of the frame, just above the electronics with Z clearance in mind. The Z axis can hit the maximum level without any issues on neither the Z axis or the X carriage.
There is also a slot ready for using the Raspberry Pi camera if you want to monitor your prints.
Combined with a WiFi USB dongle this makes for a very portable printer!
0,2 mm layer height works good. The design is optimized for a 0,4 mm nozzle.
4x M3x16 screws for the case
2x M3x8 screws for attaching the case to the frame.
First install the Lid.stl onto the frame using the two M3x8 screws. Then attach the Base.stl/Base_rasp3_NoSpringSDSlot.stl to the lid using the four M3x16 screws.