This Spool Winder can run at variable speeds to wind filament at the speed of the Extruder. A level wind mechanism is optional, but it winds fine without one.
The big difference to this winder from the first one is that the spool gear motor is mounted at the bottom of the spool, thus eliminating the rotating arm.
30%,40%,50% depending on the part.
I use 3 perimeters for parts that need hole reaming. I also use a 0.50mm nozzle
The Lyman Filament Spool Winder V3 is my current winder used with my wall mounted V6 Extruder. Download the Construction Manual a PDF file which should give you the instructions.