Designed this jewelry box as part of my wife's Christmas present.
Most parts print without support though you can choose to use some for the holes in the actual drawers. I the boxes and inserts at .25 and the lift arms at .15 for better finish from the bronzefill. Depending on if you are lining the boxes you will need to scale the inserts to fit as they are designed to sit flush with all sides of the unlined boxes. For me using felt I scaled to 98%.
You will need to weight the base to counteract the imbalance caused by the expansion of the tiers. I used tire balancing weights which you can get from amazon for next to nothing, or you could fill the bottom tier with jewelry for your intended recipient.
I left the K on the front of the tier 3 here but if you don't want that then simply print 2 tier ones and rotate one 180 to act as tier 3.
I guess this could be used as something other than a jewelry box.
Designed in fusion360