MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now



by MultiRC Nov 4, 2015
Download All Files

Thing Apps Enabled

Please Login to Comment

Will this fit on the Eachine 1000tvl fpv camera?

Will this work with a FatShark 700tvl CMOS v2 camera? Also, I noticed this exact mount is being sold on Banggood, here: http://www.banggood.com/FPV-Camera-Mount-Camera-Holder-0-45-Degree-Adjustable-For-12mm-Diameter-Camera-Lens-PLA-p-1069507.html?rmmds=search. I was wondering if you are aware of this, as it seems there are lots of goods being sold on banggood that flagrantly violate copyright laws. Anyways, thank you!

Hi firstly thank you, it works perfectly and fits where needed. I do however want to let you know, I stumbled across this being sold on Banggood: http://www.banggood.com/FPV-Camera-Mount-Camera-Holder-0-45-Degree-Adjustable-For-12mm-Diameter-Camera-Lens-PLA-p-1069507.html?rmmds=search

not sure if intentional or not.

I found that when i screwed the camera onto the mount it messed the focus up and i couldn't get it back to viewable again :(

This is exactly what I needed. Would you consider uploading your design files? I'm looking to integrate the mount directly into my Uber 180 top plate.

Printed this in ABS - wasnt crazy about it - so i'm redoing it in PLA right this second.

That said, I love the mount, but at about 20 degrees or more, it catches too much of the top place of my ZMR250 clone. I am going to have to drill another hole in the bottom plate to move it forward a little. But, i love it!

i tried many cam mounts, but this is the best one so far!
mounts great on my zmr250 and ls-210.

Thanks, glad to hear!

Works great! Thanks!!!

No problem, glad you like it.

I neeeeeeeeddd, thanks !

Does not fit ARC200 unfortunately :(

How much height will it have finally assembled with a HS1177? Will it fit my Tweaker 180?

Print came out nice. I'll be using this on a new build and will hopefully have great results.

I printed this model without supports and 0.15 layer height, 20% infill using a flashforge dreamer on slow settings. Came out beautifully... nice design, thank you.

3.8g with a 12.9 alloy steel 20mm screw and a low profile aluminum M3 nut.