MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
Need to hop dimensions? We've got you covered. Print out the parts to your very own portal gun! This gun is based on the incredible device made by Rick Sanchez from Rick and Morty.
Body.stl should be printed with a raft and supports. All other parts should print support free.
Body.stl and TopCover.stl should be printed in white
Bulb.stl and 10mmLED.stl should be printed in transparent green (We think HatchBox Transparent Green is the closest match to the show's colors)
Knob.stl and LedHolder.stl should be printed in black.
PrintedLEDScreen.stl should be printed in transparent red
Print one of everything except for the 10mmLED and LedHolder -- you will need four of each of those.
Assembling the Printed Version
Remove any support material from the body. Snap the knob into the hole on the body's handle. Use hot glue to affix the LED holders and LEDs into the holes on the front of the body and the hole in the top cover.
Using M3x6mm screws, attach the top cover to the body
Assembling the Electronic Version
The electronic version uses LEDs, a rotary encoder, an LED alphanumeric display, and a Trinket Pro to bring the full experience to this model!
You will need the following parts. We ordered ours from Adafruit:
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.