this time I attempted to improve the Axis X End Stop that in my case was a little bit shaky.
It should be a plug and play MOD... on the second picture I've drawn with a black marker where you should sand for a perfect fit.
Sorry guys you have to flip it upside down in Cura or other printing program... I forgot to do it before saving.
VERY VERY VERY IMPORTANT NOTE:
When you touch the end stop switches pay particular attention at the connections. In particular pay attention that no wire gets detached from the switch itself, as if it makes a short you could fry the Ramps and the Arduino Mega.... and guess who have I learnt from?
This MOD costed me 35 Euros in Ramps/Arduino/1Driver.
So always be careful when you change pieces in your printer.... UNPLUG IT!
And please give me some feedback if you find this MOD helpful or not...