a little mod for the Mini H-Quad to carry a small gimbal with a mobius cam
the missing parts for the quad (upper deck, arms) are from the H-Quad, arms extended to take 6030 props
motors Emax 1806-2280kV, ESC 12A flashed with BLHeli 14,
flight control will be a 2560 MultiWii board
to complete the lander you need two pieces of carbon fiber pipe, 5mm diameter, about 200mm long
each of the gimbals had some parts i liked and some i didn't like, so it's a combination off all of them :-)
The upper part is from here : http://www.thingiverse.com/thing:216558,
the arms mounted to the motors are from here : http://www.thingiverse.com/thing:224981
and the mobius mount is this one : http://www.thingiverse.com/thing:332566
the gimbal is controlled by a alexmos Board : https://www.basecamelectronics.com/simplebgc/, motors are 2206 size from HK http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=43037
i'm still waiting for some parts, so for now i can not say if this is really going to fly..
as little as possible to save some weight, the lander and arms have some more
i cut threads into the holes in the arms and then used polyamid screws to assemble it.
the inner screws hold the lander to the bottom deck and also fix the arms, the outer screws are used to fix the upper deck to the arms