Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

jsc

Apple Watch Charging Dock

by jsc Oct 6, 2015
Download All Files

Thing Apps Enabled

Please Login to Comment

This doesn't fit the cable I got when buying an Apple Watch Series 5. I'm remixed it and printing, if it fits I'll upload the remix

I've tried it out and confirmed my remix works with the series 5 cables.

Same here, the USB plug on the puck supplied with Series 5 watches doesn't fit though the hole in the base. I've also adjusted and will post a remix here.

I’m finding a difference in charging pucks. What size diameter hole is this for the charging puck ?
My charging puck is 33mm width. The actual apple one is 30mm.

This charging dock fits the Apple brand puck which is 30mm. Most printable docks do not fit the 33mm diameter aftermarket charging pucks. Just a heads up before you waste 20 feet of filament.

The hole diameter is 28.5mm, to fit a 28mm charger.

I was driving myself crazy. My wife gave me her Apple Watch Charger. She swore up and down that it came with her watch, but I measured it and it was 33.33mm. Turns out it's an aftermarket charger base. Today she pulls out the original 28mm Apple Base out of her travel bag. Shaking my head. I am printing another one. lol. I love the design. I also learned that PLA and my Dremel tool don't work good together. :)

one of my first print and one of my most usefull one using it every night!! thank you :)

This printed wonderfully with 1.75 PLA the first try. Fits my wife's Apple 2 watch (smaller version of the two currently offered) perfectly. Had to trim a bit of the bottom off for the cord to fit inside the "tunnel", but nothing a little knife couldn't fix. Since I'm new to 3D printing, I'm confident it is in my setup that caused that. Thank you for posting this.

This is an excellent design. Printed with a 50% tetrahedral infill and it looks/feels great.

Works great! Printed at a lower quality for a faster print and the hole for the usb and route for cable came out a little too tight, but nothing an exacto knife can't fix in a couple minutes. Great design.

Thanks for sharing such an awesome design. We've tweaked print parameters to make a heavier base so it's got a very nice solid feel. We're currently listing these on our Etsy shop for anyone interested - https://www.etsy.com/listing/276277650/

Does this work with the 42mm apple watch?

Fit only for the original charging adapter. I got a 3rd Party adapter and need to increase the hole.

The Design is really awesome and I like it a lot! Thanks for this!

Made one for my wife and one for myself. I set it up for her without telling her. She asked me where I bought it & was shocked that I'd made it. Thank you for helping me score some wife points with my printer! She was skeptical but is coming around to the usefulness of it.

Will this fit both the 38 and 42mm Apple Watch?

Don't know. djui says in the comments on his model that it should work with the 38mm, but I don't have one and can't test. I can easily shrink the pocket if it doesn't work.

Fusion 360 looks really sophisticated! Could you upload the source file so I can learn how a bit more about Fusion 360?

The f3d is the source file. You need to upload it to the Fusion servers before you can view/work on it.

You can step through the history at the bottom to see how it was put together. I followed your general construction from Antimony (mostly), which is not the natural way to do it in Fusion, but I wanted to be sure to get a similar result.

That's great! I really like the optimization a and especially the conversion in file size. I never had the time to redo it in a different app.