Remix of djui's dock in Fusion 360. Used his Antimony files as a basis, so all dimensions are very close to the original. A few changes were made:
- Tangent on the main body curve was slightly off.
- Charger cylinder is .5mm larger to allow for a looser fit.
- Only a single cable channel is provided, and is U-shaped instead of three-quarters round.
- 5mm hole in the back so you can poke something in there to remove the charger more easily.
The STL is hundreds of times smaller than the one generated by Antimony.
Update: added a version with a deeper cable channel and a 20mm rear hole based on feedback.