MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
Then print 2 Eye Horizontal ball JointV1.stl and 1 each of the other parts of this Thing.
I printed the parts in PLA at .2mm layer height, 2 shells and 50% infill.
The servo holders are designed to hold EZ Robots Micro Servos - http://www.ez-robot.com/Shop/AccessoriesDetails.aspx?prevCat=9&productNumber=13.
Install the parts as shown the photos. The servo levers are designed to be press fitted on to the servos.
To join the Eye Horizontal Servo Lever to the Eye Horizontal Tie Rod put a small screw thru the Tie Rod and screw it into the Lever. The screw must slide freely in the slot in the Tie Rod.
10/2/2015 The Eye Horizontal Tie Rod V1 was originally posted wrong, It has now been corrected and the right part is here now.
10/3/15 I have added Eye Horizontal Adj BallV1 to allow adjustment of the eyes if needed. 2 very small screws will be needed.
10/3/15 A small tab has been added to Eye Horizontal Adj BallV3. Makes it a little easier to work with. I would glue it place once the eyes are adjusted correctly.
10/23/2015 This modification fits in Gael's original head design.
More from Robotics
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving bhouston a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.