MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


Destiny Hunter Knife

by WinterHawk904 Sep 21, 2015
Download All Files

Thing Apps Enabled

Please Login to Comment

Comments deleted.

Thanks for such an excellent model! Printing my first one and it is coming out amazingly. ^^ Just enable support material and cad to make a custom slice - this is one big blade! Comes out to about 17" overall, which is typical of 'big' bushcraft knives.

So just an update. I did print out 2 of these guys and was assembling them with Scigrip #4. I found that the handle and the bottom blade piece just didn't have enough surface area with how I printed it out to keep together solidly enough. I drilled and pinned the joint using two pieces of filament and that seems to be holding up a lot better. Just a cautionary tale to watch your join areas when splitting.

Thanks for the model, it looks great!

@TaraPike, I'm currently printing this out at 20% fill on my new Cetus and it estimated roughly 56g of filament for a single knife at the same scaling. I have a 180x180x180mm print area so I had to slice this into 3 segments for printing.

Had a filament feed issue on my first run (heyo noobie printer) but I'm excited to see the output. Will post once I've got it printed.

I use 1kg Spool (2.2 lbs) - Estimate - How much Filament would a single knife take? Or how many could be made with 1kg Spool (2.2 lbs)?

For me, i have tried printing a hunters knife on here before.. the printer seems to have trouble with the hook part at the top of the blade. I will give it a second go though as part of the blade moved up towards the end and screwed up the print hahaha.

YOU THE BEST!!!! Thanks.

Comments deleted.

Would it be possible to get the editable file? I want to print this in sections :D