Although I printed the Ark from the files here (thing:118125), I added the figures from thing:1755163 and the floor from thing:3274909.
I wanted a smaller model (at four inches high) so reduced the Ark to 60%. But I had to increase the figures to 107% to match the pole positions. I sliced the floor to make it thinner and provide a flat printbed side. Then I joined two copies (in Meshmixer) and stretched it to fit the model extents. I printed the poles in order to get the right size.
I printed the Ark in MKOEM PLA (China) Silk Gold, which really does shine.
The other colours were PLA from ColorFabb Colour on Demand:
Pigeon Blue RAL5014 for the two figures
Light Grey RAL7035 for the base.
Beige RAL1001 for the poles, which actually looks like wood.
I printed it on the Ultimaker 3 with fine setting (0.1) for the cherubs, normal (0.15) for the figures and poles, fast (0.2) for the floor. Support for the cherubs and figures but no raft, instead the support setting in Cura.