Hanayama Cast Marble Puzzle
Made by profhankd, uploadedDescription
Used this as a test print for various metallic-look silk PLA. In-person, the metallic look is pretty effective and the puzzle works well.
Print Settings
Printer Brand:
MakerGear
Printer:
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
25%
Notes:
These silk PLAs need to print S. L. O. W. L. Y. I usually print around 120mm/s, but this filament only does its magic when printed around 25mm/s or slower. The silver part was printed around 50mm/s, and it is a solid piece, but as you can see, the silk PLA failed to bond at various points in the outer shell. I originally tried printing the copper piece at around 40mm/s and it did even worse -- actually, the result was unusable.