A very big thanks to PabloFerroDesign for this excellent design !!!
By reading the comments on the original model, I realized that many users had a problem with the joints. That's why I decided to print this remix of Ronniebravo10.
In the end, all the parts of Ronnie remix are ok, but as MKotsamanes reported in his comment, the joints were all loose. So I printed them at 101%. All members hold better in place now, even if it has a little discarded the different parts of the members.
I print the torso_ring.stl at 95% and eye_rings.stl at 96%.
Finally, the fingers were not very clean after slicing by Cura, so I chose to print the version of Snille (MyFingers-_sNi.stl), which reworked all hands and that actually give a much better result.
A big thanks to everyone for your contributions and sharing !