Great design - just what I was looking for!
I scaled this up to 300% in order to make a larger sweet/treat holder for the coffee table - also printed the sleigh body in two halves, to avoid any supports, by stopping the print in the slicer at the mid-point. Then glued the 2 halves together for a perfect fit.
By scaling up, the printing took quite a while to finish - each sleigh body side took about 12 hours and the ski's took 15 hours.
Final size is 27cm (L) x 14cm (W) x 17cm (H) -- or 10.6" x 5.5" x 6.7" in old money.
The result is fantastic!
red and gold
Heated Bed @ 48 deg C
Nozzle @ 210 deg C
Nozzle Size of 0.4mm
Speed of 40mm/s (2400mm/m)
First 2 layers speed of 20mm/s (1200mm/m)
3 shells, 3 bottom layers, 4 top layers