MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
I made Pattern_Kraken, Pattern_Polygon, Wavy_Complex, Wavy_Simple and Wavy_Abstract. Wavy_Abstract did not work out, as you can see in the photos.
i3 MK2 MMU
I used a 4mm brim, and set the travel, z lift, retraction, etc as described in the source
Thank you for your make.
Fot better results increase your retraction and decrease your nozzle temp and increase your travel speed for 180-200 mm/s :)
I used travel speed 200 mm/s, more retraction than you suggested (because the Prusa MMU required more retraction to reduce stringing), and no z-lift. Did you print solid or with a % infill?
It is strange, What is your PLA temp and brand?
Hatchbox at 190
And try only one in the build. There is a lot of travels :)
Yaaaaa, I should do that. I tried 5 in one