Printed this in wood.
Wood is also REALLY fun to to print with and I recommend anyone to give it a go.
If you look at the bottom of the model it's darker then slowly goes lighter.
That's me playing with the extruder heat while it's printing.
Every so many layers I would cool the tip down by 5.
I started at 240 and then 235, 230 and so on till 200.
Or you can go up.
Higher temps = Darker Wood
Lower temps = lighter wood.
And you can use wood filler, paint, stain and and...
Choke gag weeeez
It's all good