I made the test for BioFila Platec 1.75mm on the Creality CR-10 with 0.4 nozzle and used the following Temperatures:
Layer 1-111: 185°C
Layer 111-211: 188°C
Layer 211-311: 190°C
Layer 311-411: 193°C
Layer 411-511: 195°C
Layer 511-611: 198°C
Layer 611-end: 200°C
The results in that range didnt differ too much and were all good
190°C for this filament seemed perfect.
195°C produces an improved binding between layers, but I have to test printing clean overhangs with this.