MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
while i was waiting for some parts I made one without the LED screen. hooked the LED's directly (with resistor) to the battery.https://youtu.be/gCb8ofI-leI
What settings did you used for the bulb?
Infill, pattern, wall thickness, etc...?
Going from memory here but pretty positive it's .2 resolution. 0% infill, didn't want stupid lines/walls getting in the way of the light. 3 layers wall thickness.
Btw: I discovered a problem with the rotary switch...i am total new into arduino things, so where do i need to connect the other pin of the switch function?
There are 2 pins, but only one goes to the A2 pin on the trinket.
Where goes the other one? GND, 5V or other pin?
? there should be one side with two pins, one side with three pins.https://github.com/pomeroyb/PortalGun
the three sided pin is A (left), GROUND (middle), B (right). two sided pin is looking at the two pin side positive is right side and negative is left side.
Thx, that was exactly what i needed to know!