I printed 3 inch version of Snapy-brushless-Tiny-Whoop but it is little tight so I scaled it up about 1.02x.
MP03 4000kv brushless motors are used instead of Racerstar 1103.
Motors and FC come from Hermit145. (it was broken so some parts are reused for this project)
Shrouds are modified to install the motors and bottom battery holder and top vtx mount are designed newly.
Propeller: 3030 bullnose propellers with printed hub adapter
Flight controller: MX OVERSKY 32 flight control board (integrated with DSM2 7CH receiver)
ESC: Tarot TL300G5 6A ESC
Battery: 2s (1200mAh)
VTX: Eachine TX01
It flies very well.
0% for shrouds 15% for battery holder