Xbox One Controller Faceplate (Built-in Supports)
Made by haifisch1896, uploadedSource
Description
Gedruckt mit 0.1mm Schichthöhe, danach übergeschliffen und eingeölt.
Druckzeit knappe 13 Stunden bei 100% Füllung.
Material: ColorFabb Holz-PLA
Temperatur: im Schnitt 205°C
Geschwindigkeit: 30mm/s Außenwand, 45mm/s Innenwand, 70mm/s Füllung
Schaut auch in meinen Blog unter
https://haifischdruckt.wordpress.com
--
Printed with 0.1mm layer height, then polished with sandpaper and oiled.
It was printed in around 13 hours with 100% infill.
material: ColorFabb Wood-PLA
temperature: 205°C mostly
speed: 30mm/s outer wall, 45mm/s inner wall, 70mm/s infill
Watch my blog at
https://haifischdruckt.wordpress.com