Made on ToyREP. Printed of 1.75mm ABS filament with E3D clone, 0.4 mm nozzle, heated by 40W ceramics cartridge. Printed on heatbed with glass and kapton tape.
Print took 1hours and 41min, used 1447mm of filament. You can see time laps video here: https://youtu.be/UwSxXt_PTyk
- Slic3er 1.2.9
- Printrun 2015.03.10
First layer 10mm/s, 0.30mm thick, 235°C, 200% extrusion width, concentric infill, 110°C heatbed.
Other layers 12-16mm/s, 0.15mm thick, 225°C, 40% honeycomb infill, 110°C heatbed.
Retraction 1.5mm at speed 4mm/s, 0.05mm extra length on restart.
For some strange reason round shapes are not comming out nicely. There is some sort of seam at 45° angle. This is mostly visible on legs but also on back of Marvin's head. Other than that a bit of overflow when printing bridges, misshaped unsupported ears and a bit of oozing.