Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Tronxy x3a Nozzle not centred bed prints

Please Login to Comment

I was told I have to fix the offset. But I just dont have A clue where to find the offset settings.
My Prints never print directly middle of the bed.

Thanks 4 the Help Guys

Hello artwolf, in short:
Mark the middle of the bed with a pen. Design a small cross an print it at x/y 0. Measure the offsets.
Depending on Your slicer enter the values directly or inverted.
(Mostly to find at the printer setting options.)
The correct offset gets more important the larger the prints are...

Thats my Problem I dont know where to Locate the Options in my slicer to adjust the value offsets

And the name of the slicer is?

Take a look at the picture, I hope it can help.

oh shoot. i have Cura 4.0

"oh shoot. i have Cura 4.0"? Sorry, I don´t understand that, I am not a native speaker..
The pic was token from Cura 4.0. The text "... Cura 3.6" is just the name of the printer.
Could You set the offset?

Ya I changed the Values big a Big number. And my nozzle still hasnt moved.

Tomorrow I will follow your recommendations and see it through. And report back if any problems. thank you