MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
Hi folks, what are your current settings for print speed on the RB1 out of the box?
running 60mm/sec all the way around. print mostly ABS.
I run about 85mm/sec for PLA at 200 micron layer height, I will slow that down to 60mm/sec for 300 micron layer height.
Mine are around 45mm/sec for PLA with the first layer at 35 and outer shell and top surfaces at 40. 50 mm/sec minimum for Banboofill filament.