MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

just a noob question...

Please Login to Comment

in my prints, there is a little bit of space between the different lines.
i have cr10s, and flow set to 120, but it doesnt help….
do i set the flow higher?

try setting flow to 100 and check it is not the settings print quality setting

Calibrate your e-steps and don't mess around with flow multiplier, leave it at 1.

First thing I would check is that you have the correct filament width setting in your slicing software, make sure it matches the filament you are using. Usually 1.75mm but I have noticed that Cura sometimes defaults to 3mm, also check that you have the correct nozzle diameter set. Next, I'd check that your extruder is gripping the filament correctly and not slipping. After that, I would be looking at a blockage in the filament path or hot end.