Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Lulzbot Mini profiles for Simplify3D

Please Login to Comment

Does anyone have a good .FFF for the Lulzbot Mini? I'm a bit disappointed in the quality of prints from Simplify3D. I'm working to correct the problems as I go, but I'm new at this and would like a good jumping off point if anyone has a great .FFF they would share.

Thanks.

<?xml version="1.0"?>

LulzBot Mini ABS Medium 0 0.5 1 0.6 1 1 1.5 0 0.1 900 0 0.1 0 2.5 0 0.2501 4 3 2 1 2 0 0 300 0 0 150 110 0.3 0 0 3 3 0.14 85 0 1 0 1 2 3 0 999 12 7 1 0 999 2 1 1 30 1 0 Rectilinear Rectilinear 20 25 180 2 1 45,-45 0 0 0 30 0 0 70 1 0.3 1 1 0 4 45 0 0 0 0 0 1 0 1 0 0 1 1 1 15 20 1 15 60 1 70 1 0 1 0 0 1 0 0 0 0 1 0 152 152 158 0 0 0 -1 -1 1 1 -1 1 0,0|0,0|0,0|0,0|0,0|0,0 1 RepRap (Marlin/Repetier/Sprinter) r2 115200 0 G21 ; metric values,G90 ; absolute positioning,M82 ; set extruder to absolute mode,M107 ; start with the fan off,G92 E0 ; set extruder position to 0,M140 S[bed0_temperature] ; begin bed heating,G28 ; home all,M109 S150 ; set and wait for RETRACT TEMP (ABS=150),G1 Z150 E-30 F75 ; suck up 30mm of filament,M109 S170 ; set and wait for CLEANING TEMP (ABS=170),G1 X45 Y174 F11520 ; move nozzle over wiper pad,G1 Z0 F1200 ; CRITICAL: set Z top of pad,G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad,G1 X55 Y172 Z-.5 F4000 ; wiping,G1 X45 Y174 Z0 F4000 ; wiping,G1 X55 Y172 F4000 ; wiping,G1 X45 Y174 F4000 ; wiping,G1 X55 Y172 F4000 ; wiping,G1 X45 Y174 F4000 ; wiping,G1 X55 Y172 F4000 ; wiping,G1 X60 Y174 F4000 ; wiping,G1 X80 Y172 F4000 ; wiping,G1 X60 Y174 F4000 ; wiping,G1 X80 Y172 F4000 ; wiping,G1 X60 Y174 F4000 ; wiping,G1 X90 Y172 F4000 ; wiping,G1 X80 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X80 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X80 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X110 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X110 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X110 Y174 F4000 ; wiping,G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury nozzle in cleanish area,G1 Z10 ; raise z,G28 X0 Y0 ; home x and y,M109 S170 ; set to PROBING TEMP (ABS=170),M204 S300 ; set accel for probing,G29 ; Probe,M204 S2000 ; set accel back to normal,G1 X5 Y15 Z10 F5000 ; get out the way,M400 ; clear buffer,G4 S1 ; pause,M140 S[bed0_temperature] ; Set bed temp again,M109 S[extruder0_temperature] ; set extruder temp and wait,M190 S[bed0_temperature] ; wait for bed to finish heating if needed,G1 Z2 E0 F75 ; extrude filament back into nozzle,G1 Z2 E5 F75 ; extrude a blob to prime nozzle (sw),G1 Z2 E4.5 F600 ; retract 0.5mm (sw),G1 X15 Y15 Z10 F5000 ;move away from blob so S3D doesn't plunge into it (sw),G92 E0 ; reset extruder position to 0 (sw), M400 ; wait for operations to complete,M104 S0 ; hotend off,M140 S0 ; bed heater off ,M107 ; fans off,G92 E3 ; set extruder to 3 (will cause -3 retraction in next command),G1 X90 Y5 Z159 E0 F5000 ; move to cooling position and retract filament to relieve pressure,M190 R50 ; Set and wait for PEI BED REMOVAL TEMP (ABS=50),G1 Y175 F1000 ; move to cooled position,M84 ; steppers off,G90 ; absolute positioning,G4 S7200 ; hold bed temp for 2 hours (s=time in seconds),M140 S0 ; bed heater off, 0 0 Random Song 0 3000 0.75 0.75 0.8 10500 480 50 0 1 1 2.87 43 1.04 0 0 0 0 0 20 0 0 1 0 1 1.5 1 1 0 3 0 0 600 1 10 0 110 0.3 240 100 1 15 20 1 15 60 1 70 3000 2.87 43 1.04 G21 ; metric values,G90 ; absolute positioning,M82 ; set extruder to absolute mode,M107 ; start with the fan off,G92 E0 ; set extruder position to 0,M140 S[bed0_temperature] ; begin bed heating,G28 ; home all,M109 S150 ; set and wait for RETRACT TEMP (ABS=150),G1 Z150 E-30 F75 ; suck up 30mm of filament,M109 S170 ; set and wait for CLEANING TEMP (ABS=170),G1 X45 Y174 F11520 ; move nozzle over wiper pad,G1 Z0 F1200 ; CRITICAL: set Z top of pad,G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad,G1 X55 Y172 Z-.5 F4000 ; wiping,G1 X45 Y174 Z0 F4000 ; wiping,G1 X55 Y172 F4000 ; wiping,G1 X45 Y174 F4000 ; wiping,G1 X55 Y172 F4000 ; wiping,G1 X45 Y174 F4000 ; wiping,G1 X55 Y172 F4000 ; wiping,G1 X60 Y174 F4000 ; wiping,G1 X80 Y172 F4000 ; wiping,G1 X60 Y174 F4000 ; wiping,G1 X80 Y172 F4000 ; wiping,G1 X60 Y174 F4000 ; wiping,G1 X90 Y172 F4000 ; wiping,G1 X80 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X80 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X80 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X110 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X110 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X110 Y174 F4000 ; wiping,G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury nozzle in cleanish area,G1 Z10 ; raise z,G28 X0 Y0 ; home x and y,M109 S170 ; set to PROBING TEMP (ABS=170),M204 S300 ; set accel for probing,G29 ; Probe,M204 S2000 ; set accel back to normal,G1 X5 Y15 Z10 F5000 ; get out the way,M400 ; clear buffer,G4 S1 ; pause,M140 S[bed0_temperature] ; Set bed temp again,M109 S[extruder0_temperature] ; set extruder temp and wait,M190 S[bed0_temperature] ; wait for bed to finish heating if needed,G1 Z2 E0 F75 ; extrude filament back into nozzle,G1 Z2 E5 F75 ; extrude a blob to prime nozzle (sw),G1 Z2 E4.5 F600 ; retract 0.5mm (sw),G1 X15 Y15 Z10 F5000 ;move away from blob so S3D doesn't plunge into it (sw),G92 E0 ; reset extruder position to 0 (sw), M400 ; wait for operations to complete,M104 S0 ; hotend off,M140 S0 ; bed heater off ,M107 ; fans off,G92 E3 ; set extruder to 3 (will cause -3 retraction in next command),G1 X90 Y5 Z159 E0 F5000 ; move to cooling position and retract filament to relieve pressure,M190 R50 ; Set and wait for PEI BED REMOVAL TEMP (ABS=50),G1 Y175 F1000 ; move to cooled position,M84 ; steppers off,G90 ; absolute positioning,G4 S7200 ; hold bed temp for 2 hours (s=time in seconds),M140 S0 ; bed heater off, 105 0.3 240 90 1 20 20 1 20 50 1 60 3000 2.93 25 1.04 G21 ; metric values,G90 ; absolute positioning,M82 ; set extruder to absolute mode,M107 ; start with the fan off,G92 E0 ; set extruder position to 0,M140 S[bed0_temperature] ; begin bed heating,G28 ; home all,M109 S150 ; set and wait for RETRACT TEMP (HIPS=150),G1 Z150 E-30 F75 ; suck up 30mm of filament,M109 S170 ; set and wait for CLEANING TEMP (HIPS=170),G1 X45 Y174 F11520 ; move nozzle over wiper pad,G1 Z0 F1200 ; CRITICAL: set Z top of pad,G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad,G1 X55 Y172 Z-.5 F4000 ; wiping,G1 X45 Y174 Z0 F4000 ; wiping,G1 X55 Y172 F4000 ; wiping,G1 X45 Y174 F4000 ; wiping,G1 X55 Y172 F4000 ; wiping,G1 X45 Y174 F4000 ; wiping,G1 X55 Y172 F4000 ; wiping,G1 X60 Y174 F4000 ; wiping,G1 X80 Y172 F4000 ; wiping,G1 X60 Y174 F4000 ; wiping,G1 X80 Y172 F4000 ; wiping,G1 X60 Y174 F4000 ; wiping,G1 X90 Y172 F4000 ; wiping,G1 X80 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X80 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X80 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X110 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X110 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X110 Y174 F4000 ; wiping,G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury nozzle in cleanish area,G1 Z10 ; raise z,G28 X0 Y0 ; home x and y,M109 S170 ; set to PROBING TEMP (HIPS=170),M204 S300 ; set accel for probing,G29 ; Probe,M204 S2000 ; set accel back to normal,G1 X5 Y15 Z10 F5000 ; get out the way,M400 ; clear buffer,G4 S1 ; pause,M140 S[bed0_temperature] ; Set bed temp again,M109 S[extruder0_temperature] ; set extruder temp and wait,M190 S[bed0_temperature] ; wait for bed to finish heating if needed,G1 Z2 E0 F75 ; extrude filament back into nozzle,G1 Z2 E5 F75 ; extrude a blob to prime nozzle (sw),G1 Z2 E4.5 F600 ; retract 0.5mm (sw),G1 X15 Y15 Z10 F5000 ;move away from blob so S3D doesn't plunge into it (sw),G92 E0 ; reset extruder position to 0 (sw), M400 ; wait for operations to complete,M104 S0 ; hotend off,M140 S0 ; bed heater off ,M107 ; fans off,G92 E3 ; set extruder to 3 (will cause -3 retraction in next command),G1 X90 Y5 Z159 E0 F5000 ; move to cooling position and retract filament to relieve pressure,M190 R50 ; Set and wait for PEI BED REMOVAL TEMP (HIPS=50),G1 Y175 F1000 ; move to cooled position,M84 ; steppers off,G90 ; absolute positioning,G4 S7200 ; hold bed temp for 2 hours (s=time in seconds),M140 S0 ; bed heater off 110 0.3 205 60 1 20 20 1 20 100 1 100 3000 2.85 75 1.25 G21 ; metric values,G90 ; absolute positioning,M82 ; set extruder to absolute mode,M107 ; start with the fan off,G92 E0 ; set extruder position to 0,M140 S[bed0_temperature] ; begin bed heating,G28 ; home all,M109 S140 ; set and wait for RETRACT TEMP (PLA=140),G1 Z150 E-30 F75 ; suck up 30mm of filament,M109 S140 ; set and wait for CLEANING TEMP (PLA=140),G1 X45 Y174 F11520 ; move nozzle over wiper pad,G1 Z0 F1200 ; CRITICAL: set Z top of pad,G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad,G1 X55 Y172 Z-.5 F4000 ; wiping,G1 X45 Y174 Z0 F4000 ; wiping,G1 X55 Y172 F4000 ; wiping,G1 X45 Y174 F4000 ; wiping,G1 X55 Y172 F4000 ; wiping,G1 X45 Y174 F4000 ; wiping,G1 X55 Y172 F4000 ; wiping,G1 X60 Y174 F4000 ; wiping,G1 X80 Y172 F4000 ; wiping,G1 X60 Y174 F4000 ; wiping,G1 X80 Y172 F4000 ; wiping,G1 X60 Y174 F4000 ; wiping,G1 X90 Y172 F4000 ; wiping,G1 X80 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X80 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X80 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X110 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X110 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X110 Y174 F4000 ; wiping,G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury nozzle in cleanish area,G1 Z10 ; raise z,G28 X0 Y0 ; home x and y,M109 S140 ; set to PROBING TEMP (PLA=140),M204 S300 ; set accel for probing,G29 ; Probe,M204 S2000 ; set accel back to normal,G1 X5 Y15 Z10 F5000 ; get out the way,M400 ; clear buffer,G4 S1 ; pause,M140 S[bed0_temperature] ; Set bed temp again,M109 S[extruder0_temperature] ; set extruder temp and wait,M190 S[bed0_temperature] ; wait for bed to finish heating if needed,G1 Z2 E0 F75 ; extrude filament back into nozzle,G1 Z2 E5 F75 ; extrude a blob to prime nozzle (sw),G1 Z2 E4.5 F600 ; retract 0.5mm (sw),G1 X15 Y15 Z10 F5000 ;move away from blob so S3D doesn't plunge into it (sw),G92 E0 ; reset extruder position to 0 (sw), M400 ; wait for operations to complete,M104 S0 ; hotend off,M140 S0 ; bed heater off ,M107 ; fans off,G92 E3 ; set extruder to 3 (will cause -3 retraction in next command),G1 X90 Y5 Z159 E0 F5000 ; move to cooling position and retract filament to relieve pressure,M190 R45 ; Set and wait for BED REMOVAL TEMP (PLA=45),G1 Y175 F1000 ; move to cooled position,M84 ; steppers off,G90 ; absolute positioning,G4 S7200 ; hold bed temp for 2 hours (s=time in seconds),M140 S0 ; bed heater off, 110 0.25 250 75 1 8 20 1 8 40 1 80 2700 2.94 75 0.97 G21 ; metric values,G90 ; absolute positioning,M82 ; set extruder to absolute mode,M107 ; start with the fan off,G92 E0 ; set extruder position to 0,M140 S[bed0_temperature] ; begin bed heating,G28 ; home all,M109 S160 ; set and wait for RETRACT TEMP (ALLOY910=160),G1 Z150 E-30 F75 ; suck up 30mm of filament,M109 S170 ; set and wait for CLEANING TEMP (ALLOY910=170),G1 X45 Y174 F11520 ; move nozzle over wiper pad,G1 Z0 F1200 ; CRITICAL: set Z top of pad,G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad,G1 X55 Y172 Z-.5 F4000 ; wiping,G1 X45 Y174 Z0 F4000 ; wiping,G1 X55 Y172 F4000 ; wiping,G1 X45 Y174 F4000 ; wiping,G1 X55 Y172 F4000 ; wiping,G1 X45 Y174 F4000 ; wiping,G1 X55 Y172 F4000 ; wiping,G1 X60 Y174 F4000 ; wiping,G1 X80 Y172 F4000 ; wiping,G1 X60 Y174 F4000 ; wiping,G1 X80 Y172 F4000 ; wiping,G1 X60 Y174 F4000 ; wiping,G1 X90 Y172 F4000 ; wiping,G1 X80 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X80 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X80 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X110 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X110 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X110 Y174 F4000 ; wiping,G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury nozzle in cleanish area,G1 Z10 ; raise z,G28 X0 Y0 ; home x and y,M109 S170 ; set to PROBING TEMP (ALLOY910=170),M204 S300 ; set accel for probing,G29 ; Probe,M204 S2000 ; set accel back to normal,G1 X5 Y15 Z10 F5000 ; get out the way,M400 ; clear buffer,G4 S1 ; pause,M140 S[bed0_temperature] ; Set bed temp again,M109 S[extruder0_temperature] ; set extruder temp and wait,M190 S[bed0_temperature] ; wait for bed to finish heating if needed,G1 Z2 E0 F75 ; extrude filament back into nozzle,G1 Z2 E5 F75 ; extrude a blob to prime nozzle (sw),G1 Z2 E4.5 F600 ; retract 0.5mm (sw),G1 X15 Y15 Z10 F5000 ;move away from blob so S3D doesn't plunge into it (sw),G92 E0 ; reset extruder position to 0 (sw), M400 ; wait for operations to complete,M104 S0 ; hotend off,M140 S0 ; bed heater off ,M107 ; fans off,G92 E3 ; set extruder to 3 (will cause -3 retraction in next command),G1 X90 Y5 Z159 E0 F5000 ; move to cooling position and retract filament to relieve pressure,M190 R50 ; Set and wait for PEI BED REMOVAL TEMP (ALLOY 910=50),G1 Y175 F1000 ; move to cooled position,M84 ; steppers off,G90 ; absolute positioning,G4 S7200 ; hold bed temp for 2 hours (s=time in seconds),M140 S0 ; bed heater off, 120 0.5 240 60 0 0.5 1 0.6 1 1 1.5 0 0.1 900 0 0.1 0 2.5 1 45 15 1 45 50 1 60 1200 2.8 75 0.97 G21 ; metric values,G90 ; absolute positioning,M82 ; set extruder to absolute mode,M107 ; start with the fan off,G92 E0 ; set extruder position to 0,M140 S[bed0_temperature] ; begin bed heating,G28 ; home all,M109 S150 ; set and wait for RETRACT TEMP (TGLASE=150),G1 Z150 E-30 F75 ; suck up 30mm of filament,M109 S160 ; set and wait for CLEANING TEMP (TGLASE=160),G1 X45 Y174 F11520 ; move nozzle over wiper pad,G1 Z0 F1200 ; CRITICAL: set Z top of pad,G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad,G1 X55 Y172 Z-.5 F4000 ; wiping,G1 X45 Y174 Z0 F4000 ; wiping,G1 X55 Y172 F4000 ; wiping,G1 X45 Y174 F4000 ; wiping,G1 X55 Y172 F4000 ; wiping,G1 X45 Y174 F4000 ; wiping,G1 X55 Y172 F4000 ; wiping,G1 X60 Y174 F4000 ; wiping,G1 X80 Y172 F4000 ; wiping,G1 X60 Y174 F4000 ; wiping,G1 X80 Y172 F4000 ; wiping,G1 X60 Y174 F4000 ; wiping,G1 X90 Y172 F4000 ; wiping,G1 X80 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X80 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X80 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X110 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X110 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X110 Y174 F4000 ; wiping,G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury nozzle in cleanish area,G1 Z10 ; raise z,G28 X0 Y0 ; home x and y,M109 S160 ; set to PROBING TEMP (TGLASE=160),M204 S300 ; set accel for probing,G29 ; Probe,M204 S2000 ; set accel back to normal,G1 X5 Y15 Z10 F5000 ; get out the way,M400 ; clear buffer,G4 S1 ; pause,M140 S[bed0_temperature] ; Set bed temp again,M109 S[extruder0_temperature] ; set extruder temp and wait,M190 S[bed0_temperature] ; wait for bed to finish heating if needed,G1 Z2 E0 F75 ; extrude filament back into nozzle,G1 Z2 E5 F75 ; extrude a blob to prime nozzle (sw),G1 Z2 E4.5 F600 ; retract 0.5mm (sw),G1 X15 Y15 Z10 F5000 ;move away from blob so S3D doesn't plunge into it (sw),G92 E0 ; reset extruder position to 0 (sw), M400 ; wait for operations to complete,M104 S0 ; hotend off,M140 S0 ; bed heater off ,M107 ; fans off,G92 E3 ; set extruder to 3 (will cause -3 retraction in next command),G1 X90 Y5 Z159 E0 F5000 ; move to cooling position and retract filament to relieve pressure,M190 R45 ; Set and wait for PEI BED REMOVAL TEMP (TGLASE=45),G1 Y175 F1000 ; move to cooled position,M84 ; steppers off,G90 ; absolute positioning,G4 S7200 ; hold bed temp for 2 hours (s=time in seconds),M140 S0 ; bed heater off, 0 0.5 1 0.6 1 1 1.5 0 0.1 900 0 0.1 0 2.5 0.1801 6 4 200 2 0 0 300 40 40 2 30 180 1 0 0 1 1.5 1 0.6 0.6 0.8 0 0.5 1 0.6 1 1 1.5 0 0.1 900 0 0.1 0 2.5 0.2501 4 3 150 2 0 0 300 20 30 2 25 180 2 1 0 1 1.5 1 0.75 0.75 0.8 0 0.5 1 0.6 1 1 1.5 0 0.1 900 0 0.1 0 2.5 0.3001 2 2 125 2 0 0 300 15 15 2 25 180 3 1 0 1 1.5 1 0.9 0.8 0.9 0 0.5 0 0.72 1 1 1.5 0 0.15 900 0 0.1 0 2.5 0.5001 2 2 100 2 0 0 300 30 30 2 15 130 3 0 0 0 1.5 1 0.75 0.5 0.8 0 0.5 1 0.6 0.98 1 1.5 0 0.1 900 0 0.1 0 2.5 0.3001 4 4 125 2 0 0 300 95 30 3 20 130 2 0 0 1 1.5 1 0.75 0.5 0.8 97 0.4 245 70 1 15 20 1 15 75 1 100 2400 2.95 28 1.27 G21 ; metric values,G90 ; absolute positioning,M82 ; set extruder to absolute mode,M107 ; start with the fan off,G92 E0 ; set extruder position to 0,M140 S[bed0_temperature] ; begin bed heating,G28 ; home all,M109 S160 ; set and wait for RETRACT TEMP (PETG=160),G1 Z150 E-30 F75 ; suck up 30mm of filament,M109 S170 ; set and wait for CLEANING TEMP (PETG=170),G1 X45 Y174 F11520 ; move nozzle over wiper pad,G1 Z0 F1200 ; CRITICAL: set Z top of pad,G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad,G1 X55 Y172 Z-.5 F4000 ; wiping,G1 X45 Y174 Z0 F4000 ; wiping,G1 X55 Y172 F4000 ; wiping,G1 X45 Y174 F4000 ; wiping,G1 X55 Y172 F4000 ; wiping,G1 X45 Y174 F4000 ; wiping,G1 X55 Y172 F4000 ; wiping,G1 X60 Y174 F4000 ; wiping,G1 X80 Y172 F4000 ; wiping,G1 X60 Y174 F4000 ; wiping,G1 X80 Y172 F4000 ; wiping,G1 X60 Y174 F4000 ; wiping,G1 X90 Y172 F4000 ; wiping,G1 X80 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X80 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X80 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X110 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X110 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X110 Y174 F4000 ; wiping,G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury nozzle in cleanish area,G1 Z10 ; raise z,G28 X0 Y0 ; home x and y,M109 S170 ; set to PROBING TEMP (PETG=170),M204 S300 ; set accel for probing,G29 ; Probe,M204 S2000 ; set accel back to normal,G1 X5 Y15 Z10 F5000 ; get out the way,M400 ; clear buffer,G4 S1 ; pause,M140 S[bed0_temperature] ; Set bed temp again,M109 S[extruder0_temperature] ; set extruder temp and wait,M190 S[bed0_temperature] ; wait for bed to finish heating if needed,G1 Z2 E0 F75 ; extrude filament back into nozzle,G1 Z2 E5 F75 ; extrude a blob to prime nozzle (sw),G1 Z2 E4.5 F600 ; retract 0.5mm (sw),G1 X15 Y15 Z10 F5000 ;move away from blob so S3D doesn't plunge into it (sw),G92 E0 ; reset extruder position to 0 (sw), M400 ; wait for operations to complete,M104 S0 ; hotend off,M140 S0 ; bed heater off ,M107 ; fans off,G92 E3 ; set extruder to 3 (will cause -3 retraction in next command),G1 X90 Y5 Z159 E0 F5000 ; move to cooling position and retract filament to relieve pressure,M190 R50 ; Set and wait for PEI BED REMOVAL TEMP (PETG=50),G1 Y175 F1000 ; move to cooled position,M84 ; steppers off,G90 ; absolute positioning,G4 S7200 ; hold bed temp for 2 hours (s=time in seconds),M140 S0 ; bed heater off, 97 0.4 225 70 1 15 20 1 15 75 1 100 2400 2.82 60 1.36 G21 ; metric values,G90 ; absolute positioning,M82 ; set extruder to absolute mode,M107 ; start with the fan off,G92 E0 ; set extruder position to 0,M140 S[bed0_temperature] ; begin bed heating,G28 ; home all,M109 S160 ; set and wait for RETRACT TEMP (NGEN=160),G1 Z150 E-30 F75 ; suck up 30mm of filament,M109 S170 ; set and wait for CLEANING TEMP (NGEN=170),G1 X45 Y174 F11520 ; move nozzle over wiper pad,G1 Z0 F1200 ; CRITICAL: set Z top of pad,G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad,G1 X55 Y172 Z-.5 F4000 ; wiping,G1 X45 Y174 Z0 F4000 ; wiping,G1 X55 Y172 F4000 ; wiping,G1 X45 Y174 F4000 ; wiping,G1 X55 Y172 F4000 ; wiping,G1 X45 Y174 F4000 ; wiping,G1 X55 Y172 F4000 ; wiping,G1 X60 Y174 F4000 ; wiping,G1 X80 Y172 F4000 ; wiping,G1 X60 Y174 F4000 ; wiping,G1 X80 Y172 F4000 ; wiping,G1 X60 Y174 F4000 ; wiping,G1 X90 Y172 F4000 ; wiping,G1 X80 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X80 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X80 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X110 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X110 Y174 F4000 ; wiping,G1 X100 Y172 F4000 ; wiping,G1 X110 Y174 F4000 ; wiping,G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury nozzle in cleanish area,G1 Z10 ; raise z,G28 X0 Y0 ; home x and y,M109 S170 ; set to PROBING TEMP - NGEN=170,M204 S300 ; set accel for probing,G29 ; Probe,M204 S2000 ; set accel back to normal,G1 X5 Y15 Z10 F5000 ; get out the way,M400 ; clear buffer,G4 S1 ; pause,M140 S[bed0_temperature] ; Set bed temp again,M109 S[extruder0_temperature] ; set extruder temp and wait,M190 S[bed0_temperature] ; wait for bed to finish heating if needed,G1 Z2 E0 F75 ; extrude filament back into nozzle,G1 Z2 E5 F75 ; extrude a blob to prime nozzle (sw),G1 Z2 E4.5 F600 ; retract 0.5mm (sw),G1 X15 Y15 Z10 F5000 ;move away from blob so S3D doesn't plunge into it (sw),G92 E0 ; reset extruder position to 0 (sw), M400 ; wait for operations to complete,M104 S0 ; hotend off,M140 S0 ; bed heater off ,M107 ; fans off,G92 E3 ; set extruder to 3 (will cause -3 retraction in next command),G1 X90 Y5 Z159 E0 F5000 ; move to cooling position and retract filament to relieve pressure,M190 R50 ; Set and wait for PEI BED REMOVAL TEMP (NGEN=50),G1 Y175 F1000 ; move to cooled position,M84 ; steppers off,G90 ; absolute positioning,G4 S7200 ; hold bed temp for 2 hours (s=time in seconds),M140 S0 ; bed heater off,