MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Recent Topics

bed mount

by bcrazycramer

What parts do I need for mounting the bed? Both of these? I can't seem to find a picture with these.

View Comment

Sintron Kossel Marlin Firmware Configuration

by Wibbly

I have one of these, built it back in February and it was running like a dream. Recently I decided to upgrade the firmware to the latest Marlin, which has a host of additional features. However, in a moment of forgetfulness I deleted my original config.h files that had all of my measurements in.

I recreated everything as far as I could see (the new Marlin is quite complex to configure from scratch), and tried running the printer. The LCD works, the steppers can be controlled from Pronterface, but when I try a simple Home command from the LCD the steppers are out of synch and they only move around 10mm, and the head moves down rather than up?

What have I missed? Do I need to erase the Eeprom before uploading, and do I need to do anything else to get the printer running correctly. The latest Marlin has a Mini Kossel config.h and adv file which is what I used, but I am getting nowhere.

If anyone else has already done this and would be kind enough to post the two files somewhere for download, I would be eternally grateful, hopefully I would only need to edit for my delta measurements, and fine tune and it will work. I just need a starting point that works. :)

View Comment

invert printer?

by mybrainsshit

hiho, so to add a big cooling fan on the mainboard, i m currently thinking about inverting the printer as in: the double triangle to the top with the electronics and motors and such and the single triangle to the bottom. has anyone done that? does this increase instability/rigidity ? thoughts? problems that might occur?


Anycubic_Kossel cooling_fan inverted kossel_mini
View Comment

Kossel Mini delta

by delslogos1974

So I got one of these and starting to love it but I want to upgrade the firmware. Mine has a Duet board first gen as this board dont have wifi. Can anyone help me find the up to date firmware for this great printer.

View Comment

I need help with my kossel delta xxxl firmware

by Melad

Hi how are you guys my delta 3d printer "kossel xxxl" 2.5:1 ratio.
I need some help with the firmware it doesn't work i tried marlins and default kossel and any cubic kossel and did not work.
Any help please.
i Built it the spics are:
stepper 0.9 degree
arduino mega 2560 ramps 1.4
the printer dimensions :
L 600 mm X W 600 mm X H 1250 mm

View Comment