MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
hi, this is laurent from belgium, sorry for my englich is no good lol
ok, i am search systeme simple for stop my print with because my fil pla is finish,
please hep mee,
What printer do you have?
You need a filament sensor first, that you can buy online or make yourself with a switch and a printed case. Examples from shops maybe close to you:
Then you need somewhere to plug the sensor to, maybe your printer if you can plug-in and activate the sensor in the firmware, or alternatively you can build an Octoprint server on a Raspberry Pi and plug the sensor on the Pi. However this is more expensive and mode difficult to build.
Your 2 Links is ok for my print cr10 ?
Many thanks for info
I sent you a PM in French :)
i am CR10 and running well, many thanks for info
you can use a RaspberryPi and Octoprint with a "Filament Runout Sensor" to automaticly pause the print when filament is out.
You can use a RaspberryPi with Octoprint to attach a Filament runout sensor.
yes octoprint is nice too, thanks for info
manual use "pause print", "stop print" or "change filament" options in printer's menu.
yes this DIY is ok for mee, and low cost