Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Thiing preview is broken?

by OldGaf

I uploaded a thing yesterday and there are no file previews.... is this a know issue? Any fix for this?

View Comment

Blobs sticking out of my builds where infill lines meets shell

by Tobster123

Hellos wonderful people, I have a problem with my cr-10. As described in the title I have an issue where there are blobs that stick out at the exact same spots. These blobs seem to be right where the infill lines meet the shell and the outside of the print. Gratefull for any help.

Thanks!!!

View Comment

Concept-car model print issue

by ThomasAaren

Ok so first of all i want to clarify if i am in the correct group asking this or if i should direct elsewhere. Im asking here because i own a Cr-10 300 and will be printing with that. I drew a concept car bacxk in the days when i was 16-17..and i just recovered this model. I would LOVE to ttry and print a scaled model of this as the option of realizing dreams became ALOT more available with the 3Dprinters. Would it be enough if i simply welded the shape together at the surface....then choose all supporting devices that are needed...and try a print? I`ve only tried printing pretty basic shapes and geometry so far. :s Im trying to "simplify it in accordance of topology so far.

View Comment

Blobs sticking out of my builds where infill lines meets shell

by Tobster123

Hellos wonderful people, I have a problem with my cr-10. As described in the title I have an issue where there are blobs that stick out at the exact same spot. These blobs seem to be right where the infill lines meet the shell and the outside of the print. Gratefull for any help.

Thanks!!!

View Comment

Geeetech filament, Cura settings

by aprilla

CR-10.
I've been spoiled using REAL filament, it prints well for me using Cura's Draft PLA defaults. Lately I got some Geeetech (red and black PLA) and it's not printing nice at all. I'm using the same gcode files as I did for the REAL. I've attached pictures but I don't think it shows how bad the actual print is. It feels like it's spongy. It's all lines, is brittle and breaks/cracks along the lines with just a teensy bit of finger pressure.

I'm waiting for the printer to finish a print before I attempt to get this Geeetech printing nice. I'm not really sure where to start, it's so long since I played with settings... Any suggestions for Cura setting are welcome.

View Comment

CR10 SKR V1.3 Hotend Temp

by bwolf80

I changed my board to a SKR V1.3 Marlin 2.0 bugfix.
Everything works fine, including TFT35, SD card ...
But if I heat up the hotend, it will exceed 5 to 10 degrees and the temperature will fluctuate.
The heatbed temp works well.

I used the stock PID values from the example config and also run a PID Autotune.
The Autotune gets me values far from the original ones.
Also with the new values stored it overshoots and does not hold the temperature.

View Comment

CR-10S box has quit

by mhettinga

Hello, just curious if anyone has any tips to look for to repair my box for my CR-10S. I was replacing the nozzle and there is a chance maybe there was a short, not sure, but the box will not boot up anymore. It is non responsive and I am not sure what to do or what to look for. I did pull the fuse but there was no issue with it. It was purchased from Mechestore so I am looking into that route. Anyone have any tips to what to look for? I appreciate any feedback. Thanks.

View Comment

SEarch systeme for stop print, because fil pla is finich,

by on2vhf

hi, this is laurent from belgium, sorry for my englich is no good lol
ok, i am search systeme simple for stop my print with because my fil pla is finish,
please hep mee,
best regrds
laurent

View Comment