Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Bigtreetech SKR mini E3 for CR-10 mini?

by taeraeyttaejae

Has anyone tried out how would this control board fit inside cr-10 control box? I don't need sd card at all, i always print via usb.

It looks really nice in the specs with that price.

View Comment

Confirmed info or sources on all wiring on the Cr-10 300? Update

by ThomasAaren

After having searched this forum especially, aswell as Google and other more direct or indirect sources to find info on the pinouts (especially the pinout from control box diagram) , i am still left with contradicting info so im thinking...."what the hell, ill try". I have most of the wires written up on a diagram but i am getting different pinouts or colour identification when it comes to the CR-10. I will update this post with the confirmed diagrams and pinouts and wiring for anyone that wants to get this info at a later point (I will edit the OP with a list, im writing the list continously) For my own concern im mostly looking to find info on the pinout/brackets etc that connect or are welded into the control box, AND the 2xRed - 2xWhite wires going from the heatblock and extruder nozzle and to the control box. Does it matter how i pair these or can i just connect those willynilly as in it doesnt matter which red goes to the other? My printer "version is the Cr-10 300 i think. The ULTIMATE thing would be someone providing some credible links, diagrams or schemes i can read. Surely this has been asked many many times before but yet again i find myself having to "double check" the info i get elsewhere :\ Thanks everyone and sorry to bother you :)

View Comment

Bigtreetech SKR mini E3 for CR-10 mini?

by taeraeyttaejae

Has anyone tried out how would this control board fit inside cr-10 control box? I don't need sd card at all, i always print via usb.

It looks really nice in the specs with that price.

View Comment

Need help on how to print this large part on my CR-10 S5

by WILL1E

Hey Everyone!

I need to print about a dozen of this part. As you will see in the photo, it's about 15.9" across the corners and 5" tall.
I just purchased my CR-10 S5 and i'm running Cura 4.1 w/ the Creawesome mod.
I'm using PLA from Coex and 1.0mm tip to hopefully print this part as quickly as possible.
I did a 0% infill and made the first 15 or so layers solid so that it was strong where the screws are for mounting to the wall.
After about 5-6 layers, pretty much all the corners lifted on the build. I had the tip temp at 225 and the bed at 60.

What can i do to get this to stick better?
I was printing on bare glass that was cleaned with alcohol...do i need to use something else?

View Comment

Extruder wires and material tube knocked my print over....

by WILL1E

The wires and the material feed tube going to my extruder on my new CR10 S5 knocked over my large print last night about a 1/4 of the way into it, leaving me with a spool of material on the bed. :(

These cables hang down about 2" below (see attached photo) and i was doing a spiralize mode part so the cables were drooping inside the part therefor knocking it off.

What's the best way to get these cables up above the plane of the gantry but not limiting it's travel?

View Comment

SEarch systeme for stop print, because fil pla is finich,

by on2vhf

hi, this is laurent from belgium, sorry for my englich is no good lol
ok, i am search systeme simple for stop my print with because my fil pla is finish,
please hep mee,
best regrds
laurent

View Comment

New 2.2 mainboard - Does it need TL-Smoothers?

by tlhIntoq

I just ordered this upgraded 2.2 mainboard.
https://www.amazon.com/gp/product/B078WS3DWF/ref=ask_ql_qh_dp_hza

Anyone know if TL-Smoothers would be helpful or does the new board and chipset pretty much duplicate this functionality?

View Comment

CR10 SKR V1.3 Hotend Temp

by bwolf80

I changed my board to a SKR V1.3 Marlin 2.0 bugfix.
Everything works fine, including TFT35, SD card ...
But if I heat up the hotend, it will exceed 5 to 10 degrees and the temperature will fluctuate.
The heatbed temp works well.

I used the stock PID values from the example config and also run a PID Autotune.
The Autotune gets me values far from the original ones.
Also with the new values stored it overshoots and does not hold the temperature.

View Comment

Switch to use on an alternate hotend. Better suggestions wanted

by ThomasAaren

Hi Geeklings and Geekettes.
So ive bought an extra hotend extruder...the red thingy with the element and nozzle and heatblock attached to it. I was maybe thinking id splice my way in on the original wires so i dont have to mess around inside the Control *Box too much, and then just make a bracket to "hang" the newer hotend on while im using my "daily hotend which goes for everything.

I want to use the new hot-end for more specific stuff as foodsafes and other applicants. But by splicing myself onto the original wires, both hotends would heat up even though oen is not in use.

Could i maybe find a alternating switch which sends power onwards to the hotend of my choice and use right there and then or are there better suggestions maybe?

View Comment