hi, this is laurent from belgium, sorry for my englich is no good lol
ok, i am search systeme simple for stop my print with because my fil pla is finish,
please hep mee,
After having searched this forum especially, aswell as Google and other more direct or indirect sources to find info on the pinouts (especially the pinout from control box diagram) , i am still left with contradicting info so im thinking...."what the hell, ill try". I have most of the wires written up on a diagram but i am getting different pinouts or colour identification when it comes to the CR-10. I will update this post with the confirmed diagrams and pinouts and wiring for anyone that wants to get this info at a later point (I will edit the OP with a list, im writing the list continously) For my own concern im mostly looking to find info on the pinout/brackets etc that connect or are welded into the control box, AND the 2xRed - 2xWhite wires going from the heatblock and extruder nozzle and to the control box. Does it matter how i pair these or can i just connect those willynilly as in it doesnt matter which red goes to the other? My printer "version is the Cr-10 300 i think. The ULTIMATE thing would be someone providing some credible links, diagrams or schemes i can read. Surely this has been asked many many times before but yet again i find myself having to "double check" the info i get elsewhere :\ Thanks everyone and sorry to bother you :)
I need to print about a dozen of this part. As you will see in the photo, it's about 15.9" across the corners and 5" tall.
I just purchased my CR-10 S5 and i'm running Cura 4.1 w/ the Creawesome mod.
I'm using PLA from Coex and 1.0mm tip to hopefully print this part as quickly as possible.
I did a 0% infill and made the first 15 or so layers solid so that it was strong where the screws are for mounting to the wall.
After about 5-6 layers, pretty much all the corners lifted on the build. I had the tip temp at 225 and the bed at 60.
What can i do to get this to stick better?
I was printing on bare glass that was cleaned with alcohol...do i need to use something else?