Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Looking for case for joystick splitter?

Please Login to Comment

Not sure if call it correctly, but looking for a case to print to encase that thing http://store.ribit.se/egna-produkter/enjoy4.html
Any ideas where to look for it?
I

Ok, published it! It -should- fit perfectly... let me know if it doesn't...

https://www.thingiverse.com/thing:3608171

EnJoy4 Case (Amiga 4-Joystick Adapter)
by jartz

I have found this one https://www.thingiverse.com/thing:2266896, its very similar, but the pcb won't fit

Amiga 4-way Joystick Adapter Case

Do the connectors line up, but the PCB is too wide? If so, can you measure the PCB dimensions? I'd ping the author of that one and see if he'd re-mix it to fit your adapter. If he won't, let me know the dimensions of the PCB (and whether the connectors line up 100% with his design), and I'll come up with a remix based on his.
Edit: I measured a DB25 connector, and the screw lugs are about 47mm apart - the PCB looks to be that wide, is that right?

Seems that the case refered to might Line Up to connectors. 1-1,5mm between db9 dependant how tight soldering was done. Total PCB size 48*19mm

Thanks Diavio - what's the measurement between the back of the DB9 flanges and the back of the DB25 flange? It seems to be about 34mm.

It's me that is grateful for your support here.
I've attached much better picture with all the measures done.

I created one, but it's too deep, based on your measurements it has to be trimmed down by 4mm, lol. Photo of 'v0.9'...
Held together by 5 M3x8mm Hex-head screws. I could Implement a clip-together model instead if you like...

Hi Jartz
What do you mean to trim it down by 4mm?
Clip together model would be great to be honest, can you share the one that you already done, maybe I'll print it to check?
From the pictures it seems it should be ok.

It was too thick front-to-back... Printing the corrected one now... If things measure up right this time, I'll upload it to thingiverse...

Ok, published it! It -should- fit perfectly... let me know if it doesn't...

https://www.thingiverse.com/thing:3608171

EnJoy4 Case (Amiga 4-Joystick Adapter)
by jartz

Thanks for the efforts Jeff. I now published a first make showing the actual result.
https://www.thingiverse.com/thing:3608171/makes

EnJoy4 Case (Amiga 4-Joystick Adapter)
by jartz

Thank you Jartz, looks great, going to check it out.

Looks great!! I love the Translucent Blue!!!