Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Recent Topics

How to clean up wall wart power

by cncjim4

Is there a simple circuit to clean up power form a wall wart or buck regulator. I am trying to use a ATtiny85 the only power I can fine that is clean enough is a battery or usb power form my computer .

View Comment

mega2560(marlin) change input PIN from a.high to a.low?

by korobok

How can I change the Marlin configuration on mega 2560 so pin 11(for example) becomes active low from active high in default?

View Comment

Getting 13.5 Volts from a Yw Robot breadboard power supply

by cncjim4

I have a YwRobot MB V2 breadboard power supply. Using 9V to power it, I tried to use it to power a Nano it burned the Nano up. So I did what I should have done in the first place checked the voltage, the output was 13.5 Volts the jumpers are set for 5V. I then set the jumpers to 3.3 V and the output is 3.3 V.
It has a AMS1117 5.0 DN711 and a AMS1117 3.3 DN711. Why do I get 13.5 V when it is set for 5.0 V? I checked it with two different meters same results
Very Strange.

View Comment

Marlin M43 W - Debug Pins and watch specified pin

by korobok

ola friends! plz explain to me how this command works, for example M43 P11 W. The printer starts to follow watch pin. and if I'm giving a +5V to this pin, there is no reaction. How do I use this command?

View Comment

Using the ATtiny 85

by cncjim4

Hi everyone I just started playing with a ATtiney85 so far I have been able to load the boot loader and have successfully loaded blink.

What kind of useful has everyone built with the ATtiney85?

View Comment