Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Report as inappropriate

This works great. So glad I found this. I'll post a make once it is done serving filament to my current print job.

One thought / recommendation: I'm feeding an Original Prusa i3, and don't have any kind of feed tube that connects to the arm. I just run the filament through the open 3mm hole (i'm using 1.75, but thought the extra clearance would be better since I don't have a tube). Would it be possible to make another arm that has a much simpler guide hole? I'm thinking drop the cleaner/oiler port and just basically have a nice smooth reverse funnel with a narrow opening sized for 3mm or slightly bigger. The filament can then enter at the "bottom" of the funnel and exit the "top" of the funnel with a nice smooth surface that lets the feeder be above or below the top of the printer.