Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Report as inappropriate

nice orange :-)

here some things you could try:

  • Size - check the steps from yout Z-axis, proof with dial gauge
  • Hole Size - check your extrusion width and speed for lines > go slower.
  • Nut Size- same as holes
  • Fine Details - check your retract settings > less retract, also lower print speed to 30mm/s to check if the results are better.
  • Rounded Print - lower retract
  • Min Distance and Walls - check the extrusion width
  • Overhang - lower speed, check X/Y axis for clearance
  • Bridge Print - lower speed
  • Surface - check filament diameter with digital vernier caliper with a resolution of 0.01mm or better, adjust in software