MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Report as inappropriate

Hi Scorpio,
Print settings
Did you really printed the wing with 0.4mm width, I mean did you measured if it is 0.4mm?
If yes, congratulation! The wing will have almost 20% less weight.
I just made a test print of the servo cover, sliced with cura. Though I set 0.4mm width, the single shells for aligning and gluing were printed between 0.7mm and 0.9mm!
This can be the reason that the cover don't fit into the serco part. In this case, either you test by setting less width or better try to slice with Slic3r.

Yes, T2632-1000 is the right one.

The Zippy 1300 mAh is far too big and too heavy.
It won't fit into the fuselage and furthermore you will get a big problem with the CG.
With the recommended 950 mAh lipo you can fly at least 10 minutes.

And yes, take enough blue, it is better visible - the plane is not a very slow one ;-)