MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
I have a large STL that will go right to the extents of the build plate.
Everything lays down perfect and sticks well for 85-90% from center out, but that last outer bit close to the edge never gets close enough to stick down.
I have leveled and the probe hits all the points, is there anything else I can do?
The printer is really set up well and dialed in, I really want to use it for this STL
Back
I have a large STL that will go right to the extents of the build plate.
Everything lays down perfect and sticks well for 85-90% from center out, but that last outer bit close to the edge never gets close enough to stick down.
I have leveled and the probe hits all the points, is there anything else I can do?
The printer is really set up well and dialed in, I really want to use it for this STL