MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Report as inappropriate

LMAO, just for the record, I guarantee if I used your files the only thing that would happen is the arm geometry would be off since I currently have all aluminum rods which makes it sing fancier then carbon fiber. Is your extruder 0.9 degrees like mine?

Have you ever used winmerge?

I am having an issue compiling? So out of the box the issue is my fault? Ok let me explain this very simply: download, unzip, compile, does not work..... so that would be out of the box issues. Now after I fix the files it's download, unzip, compile, edit, compile, does work.

Marlin download, unzip, compile, edit, compile, does work but software does it's own modifications adding Zmm, watch run line by line, edit, compile, does work but is a little bit wonky adding the z height then deleting it immediately.

I laughed when you said my filament sensor was possibly faulty, tho I had already confirmed it was not, I should not of had to as a faulty filament sensor does not cause a non homing issue, especially when the issues surface after running the software successfully many times.

I also had a good laugh when you said you paid $800 fore force gauge, mine was far cheaper and is Boeing certified for NASA projects. You also should use a orchestral tuner too. I use multiple so I can see that the belt is stretching evenly.