MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Report as inappropriate

I printed the whole model on a replicator 2. The base is a big flat area and Before I switched to a glass bed and began coating it in aquanet hairspray this would have been almost impossible to print. With this upgrade the bottom is as flat as the glass it was made on. I did not need to use rafts or support on any on the pieces. A few of them need to be oriented, like the camera pieces. Most pieces to not require a lot of special settings. I think I used a higher infill on the base for strength on the Idlers. If you want information on printing directly on cold glass with hairspray I suggest going to the Makerbot Operators google group and searching for "cold glass" there are several threads that have information on the subject- https://groups.google.com/forum/#!forum/makerbothttps://groups.google.com/foru...

And some sort of sping loaded extruder if you do not have one already.