MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
I have asked this question over on the Raspberry Pi forums as well as the Raspberry Pi reddit, with no one offering me any help whatsoever. Thought I'd give this group a shot...
I have a Kano computer kit utilizing a Raspberry Pi 3b. I put Raspbian Buster on an SD card and setup everything up. No matter what I do, I cannot get audio output on the 3.5mm jack with one exception. I have tried forcing Analog Audio using raspi-config , right-clicking on the volume control and through amixer. Audio out through the HDMI interface works fine. I can get audio output through the 3.5mm jack if I force omxplayer using "-o local" but no other program will use the audio jack including VLC or system sounds and the volume control has no effect when I run it that way - even if I right-click and switch to HDMI and back. I have read that PulseAudio might be an issue, and I did try to uninstall that with no difference, but I need that installed anyway for the program I need to run - SilverJuke. I have also noticed that when I run raspi-config, the audio setting doesn't seem to be sticking - i.e. it always defaults to the default setting each time I enter that menu, whereas the other settings seem to stay where I put them. I am out of ideas if anyone could offer some advice/help....
Back
I have asked this question over on the Raspberry Pi forums as well as the Raspberry Pi reddit, with no one offering me any help whatsoever. Thought I'd give this group a shot...
I have a Kano computer kit utilizing a Raspberry Pi 3b. I put Raspbian Buster on an SD card and setup everything up. No matter what I do, I cannot get audio output on the 3.5mm jack with one exception. I have tried forcing Analog Audio using raspi-config , right-clicking on the volume control and through amixer. Audio out through the HDMI interface works fine. I can get audio output through the 3.5mm jack if I force omxplayer using "-o local" but no other program will use the audio jack including VLC or system sounds and the volume control has no effect when I run it that way - even if I right-click and switch to HDMI and back. I have read that PulseAudio might be an issue, and I did try to uninstall that with no difference, but I need that installed anyway for the program I need to run - SilverJuke. I have also noticed that when I run raspi-config, the audio setting doesn't seem to be sticking - i.e. it always defaults to the default setting each time I enter that menu, whereas the other settings seem to stay where I put them. I am out of ideas if anyone could offer some advice/help....