MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
Did the skellatore tear down and tower tweak with electronics upgrade (https://github.com/skellatore/anycubic-predator). Prints are much better now! Tower guide bearings where pretty tight in extruded aluminum (would not free fall when upright and not connected to motor). So all I did was use some steel wool to smooth out roller surface (I have painted towers), adjust roller tension so that X,Y and Z carriage would almost free fall in tower taking special care to make sure there was no slop, and shorted out ROSC resistor on board for X, Y and Z axis. Strange artifacts I was seeing are gone, can hardly see any salmon skin (have 8 diode TL Smoothers installed). 2 or 3 of the roller bearings for the carriage's now have a flat spot in them probably because of how tight they were shipped from factory. I will order new ones and replace soon. Great printer after a couple tweaks!