MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Report as inappropriate

just finished building one of these, just a heads up for people downloading the current files.

  1. the latest version uses the same supercharger servo, but it has been relocated to under the butterflies. You do not need a servo reverser for this setup.

  2. the alternator has been changed and does not require the smaller bearings, it uses the same bearings as the rest of the pulleys, so you will need a total of 8 of the larger bearings.

  3. you do not need the longer screws in the oil pan. I built the entire model with nothing but 1.2mm x 4mm screws (pushing 150 of them)

  4. for the supercharger idler pulley, a 3mm x 15mm (ish) works well, and is much sturdier than the printed part.

I'm sure DarkDragonWing knows all this, just hasn't updated the instructions to suit the new parts, so I figured I'd let people know.

absolutely awesome design btw!