Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Report as inappropriate

I think you should place the pi camera slot above the Ethernet port for the raspberry pi compartment.

Dimensions of camera slot is:
Width: 22.5mm
Height: 3.0mm

Also are your holes for the 3B+ or 4B?? Can you make one for the 4B. The 3B+ and 4B have the same dimensions but the Ethernet port has been moved.

I plan on using the raspberry pi 4B, but it requires more Amps than 3B+. Here is the DC to DC converter for the raspberry pi 4B with 4GB of memory.

New DC to DC converter for raspberry pi 4B:
NOYITO DC-DC 5A Buck Power Supply Module 9V 12V 24V 36V to 5V 5A 25W
URL:
https://www.amazon.com/NOYITO-Regulated-Converter-Suitable-Powered/dp/B07C3HXRX7

Dimensions for NOYITO 5A Buck converter from above URL:
Module size: 54mm28mm12mm

My measurements taken by hand:
Length: 53.84mm
Width: 27.97 mm

The mount holes (my measurements):

Orientation:
IN to the LEFT, OUT to the RIGHT (usb connector on the right)
Two holes on left edge, one hole in front of the OUT on right

Top LEFT hole: 4mm diameter circle
Distance to hole from top edge: 1.16mm
Distance to hole from left edge: 1.0mm
Distance to hole bottom edge: 22.88mm
Distance to hole from right edge: 49.21mm

Bottom Left hole: 4mm diameter circle
Distance to hole from bottom edge: 1.0mm
Distance to hole from left edge: 1.0mm
Distance to hole from top edge: 23.10mm
Distance to hole from right edge: 49.26mm

Hole on RIGHT in front of OUT: 4mm diameter circle
Distance from top edge: 7.25mm
Distance from right edge: 7.57mm
Distance from bottom edge: 16.85mm
Distance from left edge: 42.62mm