MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Report as inappropriate

Do not print yet. I just tried to install everything and found I forgot to account for distance the usbs sit in front of the Rpi circuit board. This results in the mounting posts being misaligned. Also the 3d model of the 2 relay I used was off so I had to adjust those posts as well. Finally the 30A relay was also too close to the headphone jack on the pi resulting in me pushing the pi to right a bit. I'm printing my update now. If all goes well I will update tomorrow.

As for the pi camera, I can try adding a slot, but I wouldn't recommend it. You will have a lot of wires running through there that I wouldn't want to add another. I'm not even certain where to put the slot. Maybe next to the fan on the lid? My recommendation would be to use a USB camera

  • Posted with 3D Geeks Thingiverse Browser App