MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
Change the part that holds the Stepper for the x-axis, seen this is not in a clean angle
Cut the profiles in clean angles or best cnc milling of cutting surface
Both sides rods for the Z-Axis and upper bearings for the rods
Put the z-axis stepper in line with the rod nut
direct extruder
6 electronic that is asembled in a clean way, not like done actually. ( by ex. cooling part which doesn't touch the IC)
better cable guidance
Well placed USB slot instead of card slot
So far if it's keept cheap
But the one I will build later on is only with linear guide rails, What mainboard... I don't know yet, seen a Duet seems a little to good for a bed pusher, whiloe on the other hand linear rails with a good extruder...... I will see
6 electronic that is asembled in a clean way, not like done actually. ( by ex. cooling part which doesn't touch the IC)
So far if it's keept cheap
But the one I will build later on is only with linear guide rails, What mainboard... I don't know yet, seen a Duet seems a little to good for a bed pusher, whiloe on the other hand linear rails with a good extruder...... I will see