MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Report as inappropriate

Ok... Now mount it. You will find that you have over 3mm of height adjustment. The bottom of the cooling duct tips should be between 1mm and 2mm above the print bed surface when the nozzle is touching the build plate. You don't want the duct tips lower than the nozzle, and you don't want the duct tips blowing on the hot-end aluminum block. I set my duct tips to be between 1.2mm and 1.4mm above the build plate.