MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
Does anyone have an issue with the acrylic fitting vertically? I had mine cut by TAP plastics, so I think the dimensions are very good (440 mm), and I measured to check them. I'm thinking there is a design error in the corners. The IKEA leg is 400 mm, so there needs to be an additional 40mm of spacing provided, but it appears that there is only 39.4mm spacing from the corners (20mm for the top, and 19.4mm from the bottom corners). This is the height of the corner brackets minus the thickness of material above and below the acrylic. So there is only 439.4mm of space for 440 mm of acrylic height. Plus there is no tolerance built in for inaccuracy in the construction (gaps, minor printing errors, small acrylic dimensional errors)