MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Report as inappropriate

Right on Bro! :)

Looks like the stringing inside was because of a lack of support on that inner ring before the cone and hole.
Ill take a look at that and see if I can get it to a better transition of 45 degrees or so.

I snapped some blades at first too, but that was because I did not read the instructions! Ha ha! ;)
Just make sure you set the Line Width in Cura to 0.85mm or so, otherwise the walls will be way to thin,
This works great for me using a 0.6mm nozzle, and should work fine with a stock 0.4mm nozzle too.

Ill post another .STL a.s.a.p. :)